top of page

VIPER

VIPER 3100V CAR ALARM SECURITY SYSTEM

Security Features

  • three button radio key (programmable, water and shock resistant with random encryption to prevent scanning and code grabbing. Lost or stolen radio keys can be programmed out)

  • Perimeter protection circuit for boot and bonnet (negative input)

  • Perimeter protection circuit for doors (positive or negative input)

  • Inbuilt 2 stage sensor, manually adjustable

  • 1 x immobilisation circuits, passively armed (18 amp continuous/30 amp max)

  • Manual arm using the radio key (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut. Auto arm will not lock the vehicle’s doors)

  • Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system. Auto re-arm can also be programmed to re-lock the vehicle’s doors

  • Last trigger identification via the dashboard LED, on disarm when the ignition is not switched on upon disarming the system after an alarm condition has occurred

 

  • Additional glass break sensor can be added (see optional accessories)

  • Additional proxi sensor can be added (see optional accessories)

  • Additional ultrasonic sensor can be added (see optional accessories)

  • Additional Tilt sensor can be added (see optional accessories)

  • Additional remote engine start can be added (see optional accessories)

 

Convenience Features

  • Central door locking/unlocking control, with a two stage lock facility

  • Central door locking/unlocking control, with a two stage unlock facility

  • Armed output (negative 500mA max)

  • Pager output (Using siren output )

  • Total closure (programmable relay maybe required)

  • Interior lamp illumination output on disarm (negative door trigger wire only relay required)

  • Boot release output (on holding down button three on the radio key for three seconds, negative output of 500mA will be provided

  • Secure ignition and valet switch override

  • Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation)

  • Silent arm and disarm for one time only if audible bleeps are programmed on

  • Sensors excludable using the radio key

 

Personal Safety Features

  • Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This feature can be permanently excluded by your installer if required

  • The panic feature allows the siren to sound and the hazards to flash, if button one on the radio key is held down for three seconds

 

Viper Box Contents

Directed alarm ECU 

Directed alarm installation wiring loom  

Siren

Blue colour LED and loom

Valet switch and loom

One or Two radio keys 

Operating instructions

Fitting Instructions

Stickers

bottom of page